Darkroom Printing Timeline
Cut negatives into strips of 6, Set Cyan and Magenta to grade 3, Make sure the easel is reading 9½ across the top and 7½ down the side, Set aperture to 5.8, place film in the film holder, place a piece of photographic paper on the easel, glossy side up and expose the image onto the paper.
Then after talk the paper to the developer and leave it in for a minute, after a minute using tongs move the paper to the fixer for 30 seconds, when 30 seconds is up using a different pair of tongs move the image into the fixer for 30 seconds, after the 30 second using a different pair of tongs move the image into the cold water and leave for 10 minutes.
Then after talk the paper to the developer and leave it in for a minute, after a minute using tongs move the paper to the fixer for 30 seconds, when 30 seconds is up using a different pair of tongs move the image into the fixer for 30 seconds, after the 30 second using a different pair of tongs move the image into the cold water and leave for 10 minutes.
No comments:
Post a Comment